PAW HeatBloC K32-DN20 with Actuator

Product Code: 23032201
Product Code: 23032201
Information
• for heating systems controlled by a mixing valve
 
Flat-sealing connections 1" external thread incl 1" union nut for the installation on a PAW modular distribution manifold. With PAW mounting equipment the HeatBloCs can be installed on wall brackets. 3-way mixing valve completely made of brass, linear characteristic (prevents temperature variation). The pump can be isolated so that it can be replaced without draining. For mounting actuators of other manufacturers, you need the adapter set item no. 705580. PAW actuator SR2 with 1.5 m cable and mounting set for snap-in assembly on the mixing valve, suited for flow on the right or left side, change-over switch for manual / automatic operation, supply 230 V / 50 Hz, torque at least 2 Nm.

Pumps fitted with 2 m cable, pre-installed, ALPHA pump with right-angle plug, completely preassembled, integrated in the insulation, pressure tested, with serial number. Check valve in the return pipe can be opened, 200 mm water column, spring-loaded, thus suited for horizontal and overhead installation.


 

 
Specifications
  • MPN:
    32053MWP6
  • Brand:
    PAW
  • Product Code:
    23032201