Roth Touchline® PL – Wireless System

Roth Touchline® PL underfloor heating control system is used for individual control and regulation of the room temperature in buildings with underfloor heating systems where a simple but well-functioning system is needed.

The system consists of a controller with 8 channels connected wireless to the room thermostats in the individual rooms. The box has a control panel which is used when pairing the thermostats. At the same time, it provides a good overview of installed thermostats with associated temperatures, and the signal strength can be easily read for each thermostat, which makes it easy to position the thermostat correctly.

The thermostats are available in 2 variants, one thermostat has a small display and touch buttons, the other is a floor temperature sensor which is set via the control panel on the control box.

Roth Touchline® PL control box

The control box is available with 8 channels. The box can be mounted directly on the wall, or by using a 35 mm DIN rail (not included). The control box has a potential-free relay for e.g. boiler control, as well as an output for pump with 230V voltage.

The following information can be read on the control panel’s control panel per. channel:

• Current and desired temperature
• Heat demand
• Signal strength
• Battery level
• Pump output status (on/off)
• Status relay (on/off)
• Alarm in case of lost connection

For a full quotation please complete the Data Capture Form and return it with your plans to UFH@seconrenewables.com

Please allow between 2-5 working days for return of your quotation. 

Data capture Form